In the hoop projects are fun for everyone regardless of skill level and today's featured project is no exception. If you are a beginner do not let the zipper scare you off. Just follow the instructions below and you will have one cutie-pie carry all!
Materials:
Tear away stabilizer
Zipper 7 inches (or longer) plastic teeth
Ribbon almost any width 4"- 10" long
Tape
Thin cotton batting
Fabric (all pressed):
For the body- the main fabric:
6" x 3" piece
6" x 7" piece
6" x 8" piece
For the liner:
6" x 3" piece
6" x 7" piece
6" x 8" piece
The batting:
6" x 3" piece
6" x 7" piece
6" x 8" piece
Hoop the stabilizer and sew step one. This is the placement line for the zipper.
Place the zipper centered between the two lines.
Next place the piece of 6" x 3'' main fabric right side facing down with the 6" side even with the top zipper placement line.
Lay the 6" x 3" liner piece directly on top of the main fabric. Then stitch step two. This will secure the zipper. Fold the two pieces back.
Next place the piece of 6" x 7'' main fabric right side facing down with the 6" side even with the bottom zipper placement line.
Lay the 6" x 7" liner piece directly on top of the main fabric. Then stitch step thee. This will secure the zipper. Fold the two pieces back.
Now insert the batting between the lining and the main fabric. Above the zipper use the 6'' x 3'' piece. Lift the main fabric and lay the batting centered over the lining fabric and gently bring the main fabric over. Repeat below the zipper with the 6'' x 7'' piece.
Now follow the next six color changes for the kitty face:
step 4- eyes
step 5- eye lids, whiskers and mouth
step 6- nose
step 7- pendant
step 8- collar or necklace
step 9- leg outline
Now for the ribbon. Depending on your desired outcome you may prefer the ribbon longer than shown. My ribbon is 4" long but my mom asked for one 10" long so she could use it as a wristlet. Fold the ribbon in half and if it is 4" long the folded part should come between her eyes then tape to secure.
Unzip the zipper a little more than half way but make sure the teeth are very close together. You will be turning the kitty right side out through the open zipper.
Now for the remaining 6" x 8'' pieces. Start with the main fabric and place it right side down centered over the project. Next lay the batting directly over it and last the liner fabric.
Now sew step ten. Then remove from the hoop and trim excess fabric and stabilizer.
Turn right side out though the zipper opening and that's it!